Lithiumrack
The Lithiumrack contains up to 10 batteryboards
with 42 pcs. standard 18650 batteries what
are worldwide high available. This results in low cost of energy
storage. However, every batteryboard can store 300 Wh. Every board
contains a security circuit what detects short circuits, over currents,
over voltages, under voltages and over temperatues. The individual
board will be switched off if one of the faults will be appear and will
be "back to work" if the fault is not present anymore. However, a 10
Ampere fuse is implemented on every batteryboard as well. 3 led´s on
every board will indicate the status of the board.
The maximum capacity is 3 kWh for one rack. The lcd display will indicate the momentary voltages, currents, temperature as well as the statusbyte of the 10 balancer on the boards and the number of batterycycles of the individual boards. A 1,5mm front cover in steel is include in order to pass high safety standards.
Here you can download the actual flyer (pdf).
Here you can download the manual (pdf).
UVP rackunit 518,- , batteryboard 458,-
Dimensions 19 inch rack |
480 mm wide x 360 mm width x 225 mm height |
---|---|
Max. charge current |
40 Ampere |
Max. discharge current |
40 Ampere |
Case | 1,5 mm steel |
Input voltages |
21,0 - 29,4 Volt |
Output voltages |
21,0 to 29,4 Volt |
Output power |
max. 1000 Watt |
Connectors | 2 x 6mm supply clamp |
Temperature range | -10° to 50°C |
Hum | 10% bis 90% RH (not condensated) |